Your Heater Died During a Cold Snap? 5 Things to Do Before You Call in San Antonio
When temperatures drop into the 30s, a heater that quits is more than an inconvenience. Your home gets cold fast and pipes are at risk. Run through these steps first. Some no-heat calls are a simple five-minute fix. The rest need professional heating repair in San Antonio.
#1. Check Safety First
If you smell gas — a rotten-egg odor — leave the house, do not flip switches or use your phone inside, and call your gas provider from outside. If your carbon monoxide alarm is sounding, get everyone outside and call 911.
If there is no gas smell and no alarm, check for burning smells near the furnace. Turn it off if you smell burning. A system that trips a breaker repeatedly needs furnace repair in San Antonio before it runs again.
#2. Run the Five-Minute Checks
Start at the thermostat. Make sure it is set to Heat, the temperature is above the room temperature, and the fan is on Auto, not On. Replace weak thermostat batteries — a common no-heat cause. Next, check your filter. A clogged filter can shut a furnace down on a safety switch. If it is gray and matted, replace it.
Then check power. Look for a tripped breaker, and check the furnace disconnect switch near the unit — it looks like a light switch and is easy to bump off. For a gas furnace, confirm the gas valve is open. Make sure vents are open and not blocked. If the system starts, let it run a full cycle.
#3. Keep Your Family and Pipes Safe While You Wait
Close blinds and curtains, shut doors to unused rooms, and gather everyone in one warm room. Use layers and extra blankets. Space heaters can help, but keep them three feet from bedding and curtains, plug them directly into a wall outlet, and never leave them unattended overnight.
Open cabinet doors under sinks on exterior walls and let faucets drip slowly. San Antonio plumbing is not built for long hard freezes, and a slow drip is cheap insurance while you wait for HVAC service in San Antonio.
#4. Know When to Call Right Away
Call right away if you have no heat and it is below 40 degrees, if the system starts and shuts off repeatedly, if you hear grinding, screeching, or repeated clicking with no heat, or if the blower only blows cold air. Those signs point to a failed igniter, motor, control board, or safety switch — parts that need a technician, not another reset.
Tell us what you checked and any error code on the furnace. That saves time on site. If repair costs keep stacking up, we will give you a straight answer on repair versus a new heater installation in San Antonio, with one flat-rate total and all model numbers.
#Get Heat Back — Call So Tex Today
Do not ride out a cold snap with no heat. So Tex Indoor Air Comfort provides same-day service during business hours for heating repair and furnace repair San Antonio homeowners can trust, plus AC repair San Antonio and system installation San Antonio when replacement is the right call.
Call (210) 306-4205 now to schedule. We will explain what failed and give you a flat-rate price before work begins.
So Tex Indoor Air Comfort — TX HVAC License #TACLB78723E. Call (210) 306-4205 today.

Leave a Reply