If you have priced a new system this year, you may have heard a new name: R-32. It is the refrigerant used in the new Goodman air conditioners and heat pumps we install, replacing R-410A, which San Antonio homes have used for years. The change affects price and what parts of your system can stay. Here is what to know before you buy.
What Changed, and Why
Manufacturers moved away from R-410A to meet new federal rules for refrigerants with a lower climate impact. R-32 does the same cooling job with a much smaller footprint, and it is classified as mildly flammable — what the industry calls A2L. That does not make a properly installed system unsafe. It does mean new systems include added sensors and controls that older equipment was never designed for.
R-32 is not a drop-in replacement. You cannot top off an R-410A system with it, and mixing refrigerants can damage the compressor and void coverage. One advantage of R-32: it is a single-component refrigerant, not a blend, so it is simpler to service, recharge, and recycle than the blended alternatives.
Why You Can’t Just Swap the Outdoor Unit
When an older outdoor unit fails, swapping only that box sounds cheaper. With this change, that shortcut often does not work. A new R-32 outdoor unit must be matched with a compatible indoor coil and air handler, in an AHRI-matched combination, to deliver its rated efficiency and qualify for CPS Energy rebates.
If a quote for system installation in San Antonio does not name both model numbers and confirm they are a matched set, ask questions before you sign. A matched system runs more efficiently and is far easier to warranty and service.
What This Means If You Own an R-410A System
Your current system does not become illegal or unusable because it uses R-410A. If it is running well, keep maintaining it. So Tex Indoor Air Comfort still provides HVAC service in San Antonio for R-410A systems, including heating repair in San Antonio and AC repair in San Antonio when a part can be fixed sensibly.
As production shifts, R-410A and some older parts are expected to get pricier and harder to source. A small repair today may still be smart. A major compressor failure on an aging, leaking system is different — that is when furnace repair in San Antonio versus replacement deserves an honest look.
How to Decide: Repair, or Replace?
Start with age, repair cost, and reliability. Under 10 years old with a minor repair? Repair it and keep it maintained. At 12 to 15 years, needing a major component and struggling through recent summers, a matched R-32 replacement may cost less over time than repeated repairs.
Get it in writing: one flat-rate total, every model number, the permit included, the labor warranty stated, and any CPS Energy rebate — up to $310 per ton on qualifying systems, paperwork handled for you.
Get Straight Answers Before You Buy
So Tex Indoor Air Comfort helps San Antonio homeowners sort repair from replacement without a scare pitch. We do room-by-room heat load calculations per ACCA Manual J using AirMatch, quote one flat-rate total, and list all equipment model numbers on every proposal for heater installation in San Antonio and full system replacement.
Thinking about a new system, or wondering if your R-410A system is worth repairing? Call So Tex Indoor Air Comfort at (210) 306-4205 for same-day service during business hours. TX HVAC license #TACLB78723E.

Leave a Reply