If you have a heat pump in San Antonio, your thermostat has a setting most homeowners never touch — EM Heat, or Emergency Heat. Using it the wrong way is one of the fastest ways to double a heating bill. At So Tex Indoor Air Comfort, we get this call every winter. Here is what it does, and when to use it.
EM Heat and Aux Heat Are Not the Same Thing
Auxiliary heat is automatic. When it gets cold, your heat pump cannot pull enough heat from outdoor air alone, so electric resistance strips in the air handler stage on to help. That is normal, and your thermostat will show “Aux Heat On.”
Emergency heat is manual and different. Switch to EM Heat and you turn the heat pump off entirely, heating only with those resistance strips — like a giant toaster element. It works, but it is the most expensive way to heat a house. For trusted HVAC service in San Antonio, the rule is simple: leave the thermostat on Heat, not EM Heat, for everyday use.
What EM Heat Costs You
A heat pump moves heat instead of making it, delivering two to three times more heat per dollar than resistance strips. EM Heat is one-to-one — every bit of heat comes straight from electricity. Leave it on for days during a cold snap and you can add $150 to $300 or more to that month’s CPS Energy bill.
If your bill spiked and the thermostat was left on EM Heat after a repair or outage, switch it back to Heat — you have likely found the cause.
When You Should Actually Use EM Heat
Use EM Heat only when your heat pump is broken, iced over and not defrosting, making grinding noises, or blowing cold air — and you need heat until help arrives. Use it during a repair while parts are on order, or overnight in a no-heat emergency.
Then call for heating repair in San Antonio during business hours. EM Heat is meant for hours, not weeks. Nearby, we offer the same guidance through our heating repair service in Boerne.
Signs Your Heat Pump Needs Help, Not Just EM Heat
If Aux Heat runs all day on a mild 45-degree afternoon, something else is wrong — low refrigerant, a dirty outdoor coil, a failing reversing valve, or a sensor issue. Other red flags: ice that never melts, short cycling, cold air in Heat mode, or a breaker that trips when the strips kick on. Those are repair issues, and catching them early is cheaper than running on strips.
Heat pumps need maintenance twice a year. A fall check catches weak strips and defrost problems before the first freeze.
What To Do If You Are Not Sure
Check the thermostat: Heat, fan on Auto. Give it 30 minutes — brief cooler air during defrost is normal. Check your filter and clear the outdoor unit. If it still blows cold or ices over, switch to EM Heat and call us.
So Tex Indoor Air Comfort provides flat-rate, written pricing before work begins for furnace repair in San Antonio, heat pump repair, and heater installation in San Antonio. We are licensed in Texas, TX HVAC license #TACLB78723E, and handle permit and warranty registration on installs. Call (210) 306-4205 for same-day service during business hours — Monday through Friday 8 AM to 8 PM, Saturday 9 AM to 1 PM.

Leave a Reply